Home > Machine Error > Machine Error 71 Brother

Machine Error 71 Brother

Slide this from side to side making sure to return it to its' home position and reinsert it into the machine. Explanation: Switch the machine off and back on again. Explanation: Worn laser units can cause poor quality print and the printer to fail. Press "menu" key and simultaneously reconnect power cord.3. this contact form

Dirt, dust or dryness between the polygon mirror post and the motor bushings is what causes  the noise and the 71 machine error.    As the machine gets up to speed If error persists the scanner unit will need replacing. by nivek on Jun 4, 2009 at 9:28am Add comment Please sign in to comment 0 The guy at Brother said this had to do with the printheads. Check path for obstuctions and remove any foreign materials. http://www.fortwayneprinterrepair.com/wordpress/2011/11/27/machine-error-71-fax-4100-4100e/

What to do: Error: 88 Error Code: Paper Feed Error: The machine is detecting a paper jam in the recording paper path. If the error persists then an engineer will be required to determine the cause if it. What to do: Machine Error: 41 Error Code: Printhead Error: The machine has detected a problem with the functioning of the printhead.

why? If error persists the pick-up rollers or solenoid may need replacing. Pretty much the motor needs to get up to a certain RPM. Too hot, not hot enough or not heating up at all.

Complete the following steps to troubleshoot this issue: PART 1: VERIFY THE CABLE... What to do: Machine Error: 85 Error Code: Ink Ribbon Error: The machine is detecting a problem with the ribbon used to print documents. Explanation: Check that the machine is connected to a telephone line and that the line is live. For anybody planning on doing this that hasn't done one before I would recommend finding a service manual first before disassembly.

Add a printer driver - Windows Vista 1.Downloadthe Add Printer Wizard Driver from http://www.brother-usa.com . Explanation: Worn transfer belts can cause poor quality print and paper jams. Question about MFC 9700 All-In-One Laser Printer 3 Answers I have a brother mcf-8840d ...brother mcf-8840d with an error code 71. If error persists you will need an engineer to determine which fan is faulty and replace it.

Explanation: Check the printhead to see if anything is stuck to it. Explanation: Replace the toner unit. The sensor is detecting a problem. What to do: Error Code: 5E Error Code: Replace the Belt Unit: The transfer belt has reached the end of its specified life cycle.

Slow print from computer Print Speeds, stated as pages per minute (PPM), reflect measured values based on Brother's particular testing conditions and are for reference only.Actual print speed may vary depending... weblink Respond to this 0 If the printer is still under warranty, Brother is going to replace the MFC free of charge.This just happened to my father, who is setting up his Sometimes it does, other times for a while or not at all. If nothing is found, then there may be a problem with the paper sensors.

Or just drag it here! Open the body of the printer and check for jammed paper. Kevin Find printer service newsletters, parts, and more at: http://www.feedroller.com/ Related posts:Machine Error 71 - Brother MFC-8440-8840D-8840DN-DCP-8040-8045D-8045DN Machine Error 71 - Brother MFC-8420-8820D-8820DN-DCP-8020-8025D-8025DN Brother Fax, MFC 4750, 5750, 4100, 4100E, 8300 navigate here Suggestions:Make sure all words are spelled correctlyUse different words that mean the same thing Results 1 - 10 of 252 Recommended Links Print a test page from the computer Unable to

Explanation: Switch the machine off and back on again. Download and install an Add Printer Wizard Driver for Windows 7 1. What to do: Machine Error: A2 Error Code: Document Jam: The machine has detected a problem with a page being sent via the document feeder, possibly taking too long to scan.

Explanation: Follow the waste toner box replacement section in the user guide.

The printer has detected that there is a problem with the temperature, too hot or not heating up enough. Explanation: Switch the fax machine off and back on again. What to do: Error Code: 57 Error Code: Paper Jam in Duplex: A paper jam has occurred in the unit that turns the page for double sided printing. If nothing is found, the feed rollers or document sensors may be defective.

If the error persists, then the document feed rollers may need replacing. You will need to download the add printer driver. The alphanumeric code is used by looking up the relevant description in the user manual. his comment is here What to do: Machine Error: 88 Error Code: Paper Jam Error: The machine has detected a paper jam in its feed path.